火星车转移坡道柔顺性优化设计及动力学分析

对一种抽展式火星车转移坡道开展柔顺性优化设计和动力学分析。首先，分析火星车与存在异面角的坡道的挤压几何原理。然后，设计坡道的间隙机构和限位机构，并计算出机构关键设计参数的最优值，以自适应调整两侧坡道的距离，〖JP2〗减小火星车与坡道护栏之间的相互作用力。最后，对坡道下落过程和火星车在坡道上的行驶过程进行动力学仿真，验证坡道柔顺性优化设计的效果。结果表明：优化后的坡道柔顺性大幅提高，坡道可以自适应调整两侧的距离；使用优化后的坡道，可以有效降低火星车与坡道护栏的作用力，实现火星车在坡道上的安全行驶。     

无刷双馈电机静止坐标系数学模型的研究

由于没有电刷和滑环,提高了运行的可靠性,降低了维护成本,因此无刷双馈电机(BDFM)在变速恒频发电领域有着广阔的应用前景。由于特殊的结构和工作原理,BDFM数学模型十分复杂。从BDFM多回路空间矢量数学模型出发,推导出了两个静止坐标系之间的坐标变换关系以及功率绕组静止坐标系数学模型和控制绕组静止坐标系数学模型,推导过程简洁明了。所得结果为BDFM理论分析和不同控制策略的研究提供了理论基础。MATLAB/Simulink环境下的仿真结果验证了数学模型及坐标变换关系的正确性。     

A new modeling scheme for powered parafoil unmanned aerial vehicle platforms: Theory and experiments

A novel framework is established for accurate modeling of Powered Parafoil Unmanned Aerial Vehicle (PPUAV). The model is developed in the following three steps: obtaining a linear dynamic model, simplifying the model structure, and estimating the model mismatch due to model variance and external disturbance factors. First, a six degree-of-freedom linear model, or the structured model, is obtained through dynamic establishment and linearization. Second, the data correlation analysis is adopted to determine the criterion for proper model complexity and to simplify the structured model. Next, an active model is established, combining the simplified model with the model mismatch estimator. An adapted Kalman filter is utilized for the real-time estimation of states and model mismatch. We finally derive a linear system model while taking into account of model variance and external disturbance. Actual flight tests verify the effectiveness of our active model in different flight scenarios.     

复杂动态环境下无人飞行器动态避障近似最优轨迹规划

针对复杂动态环境下无人飞行器的动态障碍规避问题，基于合理假设建立了无人飞行器和动态障碍的运动学模型，并综合考虑无人飞行器飞行过程中的终端约束、控制输入约束、安全避障约束等，以能量最少为性能指标构建动态避障问题数学描述。之后，针对终端约束和控制输入约束，依据优化模型预测静态规划算法(OMPSP)生成初始轨迹；针对动态避障问题的不等式约束，引入松弛变量并结合滑模变结构控制方法设计松弛变量动力学，实现对一个、多个或同时多个动态障碍的安全规避；最后，依据有限时间微分动态规划(RHDDP)算法进行轨迹优化，获得满足上述各种约束并能规避动态障碍的近似最优轨迹。     

熔融沉积成型连续碳纤维增强尼龙蜂窝芯材的压缩特性

采用熔融沉积成型方法成形了连续碳纤维增强尼龙复合材料蜂窝芯材,并对不同测试方向的静态单轴压缩特性进行了表征分析,着重关注不同测试方向熔融沉积成形蜂窝芯材平面静态压缩破碎行为和能量吸收行为,并与纯聚合物基体进行对比。结果表明:X_1方向的压缩平台区域的力-位移曲线更加平滑稳定,且载荷值稍高于X_2方向,因此X_1方向更适用于能量吸收应用;此外,连续纤维的增强作用可使蜂窝芯材的平台载荷值得到明显提升。研究结果为连续纤维增强聚合物复合材料的空间增材制造提供理论基础。     

同轴离心式喷嘴热声不稳定性递归分析

为获得同轴离心式喷嘴燃烧动力学特性，开展了喷注单元稳定性试验研究。试验中燃料流量不变，随氧化剂流量增加，热声系统依次经历了燃烧噪声状态、阵发状态和准周期振荡状态。采用递归方法对实验结果进行分析。首先，利用交互信息法和虚假最邻近法分别求解最优延迟时间和嵌入维数，获得了典型工况下的相空间轨迹图。其次，递归图分析表明系统出现了第II类阵发现象，意味着系统发生了亚临界Hopf分叉，与实验结果一致。最后，递归量化分析表明，确定率可以将阵发状态和准周期振荡状态与燃烧噪声状态区分出来，并可以对热声振荡进行预报。     

某航天器输氢管道系统结构完整性评估

为保障某航天器在服役年限内不发生事故，针对航天器上采用插入焊接技术的精密管道系统进行结构完整性评估。在考虑到系统存在整圈的环形未焊透缺陷基础上，结合工程实践，假设在焊接区域存在更危险的平面缺陷。首先，开展高压气相热充氢试验下的标准拉伸和三点弯试验得到管道系统材料"J-75"在临氢环境下应力应变曲线和断裂韧性。其次，采用有限元程序计算系统在内压、惯性载荷与离面位移作用下的应力分布，考虑到间隙配合中的不确定性，改变模型中的最大间隙多次模拟计算，发现最大应力位置基本不变，以此区域作为假想缺陷的具体萌生区域。最后，采用失效评估图（FAD）方法对存在4种缺陷模式的系统分别进行结构完整性评估。通过引入安全裕度的概念，发现系统在含有初始尺寸（0.15 mm）的4种平面缺陷时，均处于安全状态，并且安全裕度都在2倍以上；通过工程临界分析（ECA）发现随着缺陷尺寸的增大，系统中含有缺陷2（位于管道焊接区域最大应力处的轴对称平面且沿焊深方向扩展的缺陷）时最为危险，且当缺陷深度超过0.61 mm时将断裂失效；考虑到测试数据的弥散性，针对系统最危险的模式，以安全裕度为可靠性指标，将失效评估图方法与可靠性评价相结合，得到系统在含有尺寸为0.15 mm的缺陷2情况下保有足够安全裕度的可靠性下限值超过0.999 5。     

绕月微卫星精确撞月轨道设计

为实现约束条件下的精准可控撞月,提出了基于Lambert问题的精确撞月轨道设计方法。通过求解Lambert问题,可得到撞月轨道轨控时刻的速度脉冲初值解,然后通过打靶法迭代得到撞月轨道的精确解。以"龙江二号"微卫星轨道为例,对撞月点经纬度的覆盖性,以及燃料约束下同一撞月点可行的轨控弧段进行全面分析。最后,通过月球南极水冰探测的撞月轨道设计案例,以验证本文提出的轨道设计方法的有效性。     

Comparison of vertical E × B drift velocities and ground-based magnetometer observations of DELTA H in the low latitude under geomagnetically disturbed conditions

In the present work, we analyzed the daytime vertical E × B drift velocities obtained from Jicamarca Unattended Long-term Ionosphere Atmosphere (JULIA) radar and ΔH component of geomagnetic field measured as the difference between the magnitudes of the horizontal (H) components between two magnetometers deployed at two different locations Jicamarca, and Piura in Peru for 22 geomagnetically disturbed events in which either SC has occurred or Dst_max < ?50 nT during the period 2006–2011. The ΔH component of geomagnetic field is measured as the differences in the magnitudes of horizontal H component between magnetometer placed directly on the magnetic equator and one displaced 6–9° away. It will provide a direct measure of the daytime electrojet current, due to the eastward electric field. This will in turn gives the magnitude of vertical E × B drift velocity in the F region. A positive correlation exists between peak values of daytime vertical E × B drift velocity and peak value of ΔH for the three consecutive days of the events. It was observed that 45% of the events have daytime vertical E × B drift velocity peak in the magnitude range 10–20 m/s and 20–30 m/s and 20% have peak ΔH in the magnitude range 50–60 nT and 80–90 nT. It was observed that the time of occurrence of the peak value of both the vertical E × B drift velocity and the ΔH have a maximum (40%) probability in the same time range 11:00–13:00 LT. We also investigated the correlation between E × B drift velocity and D_st index and the correlation between delta H and D_st index. A strong positive correlation is found between E × B drift and D_st index as well as between delta H and D_st Index. Three different techniques of data analysis – linear, polynomial (order 2), and polynomial (order 3) regression analysis were considered. The regression parameters in all the three cases were calculated using the Least Square Method (LSM), using the daytime vertical E × B drift velocity and ΔH. A formula was developed which indicates the relationship between daytime vertical E × B drift velocity and ΔH, for the disturbed periods. The E × B drift velocity was then evaluated using the formulae thus found for the three regression analysis and validated for the ‘disturbed periods’ of 3 selected events. The E × B drift velocities estimated by the three regression analysis have a fairly good agreement with JULIA radar observed values under different seasons and solar activity conditions. Root Mean Square (RMS) errors calculated for each case suggest that polynomial (order 3) regression analysis provides a better agreement with the observations from among the three.     

基于Ansys Icepak 的负载器热设计与热分析

基于热设计的基础理论与负载器的工作原理，应用Ansys Icepak仿真软件对供配电负载器工作过程中内部散热情况进行仿真，找出负载器内部温度最高部位，指导实际测试，避免实际测试的盲目性。另外，通过优化负载器散热孔设计，降低负载器温升值。